How To Wall Mount a Flat Screen TV?

Wall Mount Flat Screen TV
Wall Mount Flat Screen TV

One of the most unique aspects of a flat screen television is the fact that the design allows the entire unit to be mounted flush against a wall, but few consumers take advantage simply because they believe the process to be much more complex than it actually is. It is important for individuals to realize that the flat screen televisions are designed to be viewed from directly ahead, and the optimal picture will only be achieved if it is positioned at the proper height. The easiest way to accomplish this task is to wall mount the unit, and the following guide can help a consumer determine where to begin.

Select an Appropriate Location

When looking for a place to wall mount a flat screen TV, it is necessary to consider several different factors. The mounting location is going to obviously need to be in the room that the television belongs in, and the specific place must work with the furniture arrangement. However, a consumer also must think about where the television will be plugged in for power. Various inputs from a satellite, cable, or DVD source may be required, and a person should at least consider how they are going to run the wires. Some flat screen televisions can support wireless sources, but others will require some type of external wiring. If external wiring is required, there is an additional paragraph below to provide more information.

Gather Necessary Materials / Equipment

– Stud Finder
– Level
– Hammer
– Drill
– Screwdriver
– Pencil
– Tape Measure
– Extra Pair of Hands


The necessary materials must be gathered prior to attempting to wall mount a flat screen TV, or serious damage or injury can occur. Televisions are often fairly heavy and an extra person should always be on hand before any lifting or installation is attempted.

Install Wall Mount for Flat Screen TV

The wall mount must be fastened securely, and the actual process will vary somewhat based on the type of mounting surface and the weight of the television. While it is a good idea to fix a wall mount directly to a stud or support beam, there are going to be installations in which this is simply impossible. A consumer can also utilize a wall mount that is designed to be used with drywall hangers, but it is important to note that this is only acceptable for smaller and lighter units. The installation instructions that come with the mount should be followed, but all mounts will require the same prep work. Installers should ensure that the wall mount is completely level before firmly fastening the final bracket or screw. After the mount is properly installed and securely fastened, the flat screen television is relatively easy to secure provided that additional help is handy.

Complete Wiring and Hook Up

Many of the modern flat screen televisions that are available will support wireless components, but there are still some that do not. Individuals that are going to have to deal with external wires can either run them down the wall and face looking at them constantly, or they can run the wires through the drywall. Drilling two holes in the drywall to allow the wires to run behind the wall is the most acceptable method, and it certainly isn’t difficult. However, a consumer that doesn’t feel comfortable with the wire running process should probably enlist the help of a qualified professional.

A flat screen television is designed to be displayed flush on a wall, and the above guide will help an individual learn how to properly complete the installation.



Darren

Author: Darren

Darren Urman became a professional writer 15 years ago, when he retired as a building contractor. Darren joined the THF team of writers in July, 2009. He enjoys cooking, writing, and traveling.

Leave a Reply

Your email address will not be published. Required fields are marked *